PalmBeach Version 08.01.1999

This version of PalmBeach is a really beta-Version!

For the newest Versions see my website:

http://www.augusta.de/~michael/BeOS/

There is much to do and the speed should increased dramatically.
But you can install it and test a little bit. 

But be shure, you saved your PSION-Files before, if somthing unexpected happend!

How to install:
You only have to make a link (or copy) from the file "psionfs" to:
/boot/home/config/add-ons/kernel/file_systems/psionfs

Then you can start the Program "PalmBeach". You will see a Window with 2 Tab's. first goto the Tab "Settings" and select the "serial Device" and the "serial Speed". Then save the Preferences.

Now you're ready to connect to your PSION.

Klick on Connect and after a few sekonds there should appear a new Disk on your Desktop. Thats your PSION-Device M:

At the moment there is only the device M: accessible! And you can only read the Data from the PSION!

You are also able to walk through you BeOS from the PSION, when youre inside the "Files"-Program. You will see your BeOS-Devices. And you will see the mounted PSION!! so be patient!

There is much Debuggingcode inside the program, so you have to delete sometimes the files: /var/log/rfsv-client /var/log/rfsv-server and 
/var/log/link-server!

To see, what the filesystem is doing, start the Program "DebugWin" before you start PalmBeach.

Known Problems:

When you Disconnect, you have to leave PalmBeach to connect again!
When you rightclick on the "Psion-Icon" the Icon is lost.
No fault-handling!
Sometimes the filesystem can't be unmounted!

